Carbon Mast HM 100 cm V3

Gong Foil Carbon Mast HM 100 cm V3

The Gong Foil Carbon Mast HM 100 cm V3 represents the pinnacle of foiling technology. Designed for riders seeking precision, speed, and effortless control, this mast elevates the foiling experience to new heights. Every detail—from carbon layering to hydrodynamic shaping—has been meticulously engineered. The result is a mast that feels intuitive underfoot, responsive in every maneuver, and durable across countless sessions.

For those who demand excellence, this mast offers both performance and reliability. It is suitable for all rider levels, from beginners discovering the thrill of foiling to experts pushing the boundaries of speed and agility. Moreover, the 100 cm height provides a balanced combination of stability and maneuverability, ensuring confident rides in a variety of conditions.Gong Foil Carbon Mast HM 100 cm V3

---

Gong Foil Carbon Mast HM 100 cm V3 Key Features and Specifications

High-Modulus Carbon Construction

The HM carbon material ensures optimal strength-to-weight ratio. Each mast is crafted with precision-engineered carbon layups, delivering:

• Exceptional torsional stiffness

• Lightweight design for effortless handling

• Enhanced lift performance

Gong mast V3 Hydrodynamic Efficiency

Every curve and edge has been refined to minimize drag. This mast glides smoothly through water, improving speed and efficiency. Riders benefit from:

• Faster take-offs

• Improved glide and acceleration

• Smoother carving in choppy conditions

Gong mast V3 Upgrade: Precision Engineering

The V3 version incorporates feedback from riders worldwide. Reinforced stress points and advanced carbon layering result in:

• Reduced flex under load

• More precise control in aggressive maneuvers

• Consistent performance in high-speed conditions

Gong Foil Carbon Mast HM 100 cm V3 Universal Compatibility

The Gong Foil Carbon Mast HM 100 cm V3 is compatible with a wide range of foiling setups, including:

• Gong Foil boards of all categories

• Various wings and fuselage combinations

• Adjustable mounting for both freeride and race configurations

Gong Foil Carbon Mast HM 100 cm V3 Specifications Table

---

Gong mast V3 Performance Advantages

Lift and Stability

The 100 cm V3 mast provides superior lift while maintaining balance. Riders experience:

• Quicker take-offs with minimal effort

• Enhanced stability for confident carving

• Reduced fatigue during extended sessions

Gong mast V3 Precision Control

With optimized torsional stiffness, the mast translates every rider input into accurate movement. Whether performing tight turns, pumping for speed, or cruising, control feels natural and predictable.

Gong Foil Carbon Mast HM 100 cm V3 Durability and Reliability

Reinforced carbon layers protect against wear and tear, impacts, and environmental stress. Each mast undergoes rigorous quality checks to ensure:

• Longevity over multiple seasons

• Resistance to delamination and cracks

• Maintenance of performance under extreme conditions

Gong Foil Carbon Mast HM 100 cm V3 Installation and Setup Guide

Proper installation of the Gong Foil Carbon Mast HM 100 cm V3 is essential for maximizing performance, safety, and durability. Following these steps ensures optimal alignment, stability, and rider confidence.

---

 Preparing for Installation

Before mounting your mast, make sure you have:

• Compatible Gong Foil Board or universal mounting setup

• Fuselage, front wing, and rear stabilizer

• Gong-approved mounting hardware

• Clean workspace and tools (torque wrench recommended)

Rinsing all components with fresh water helps remove any salt or debris, which can interfere with hardware fitting and reduce longevity. Preparing a clean surface ensures precision during assembly.

---

 Mounting the Mast to the Fuselage

1. Align the Mast Base: Position the base of the mast carefully over the fuselage mounting point. Ensure holes are correctly aligned for a secure fit.

2. Insert Bolts: Use the provided stainless-steel bolts to attach the mast to the fuselage.

3. Torque to Specification: Use a torque wrench to tighten bolts to the manufacturer’s recommended settings. Over-tightening can damage the carbon layup, while under-tightening compromises stability.

4. Check Alignment: Ensure the mast is perfectly perpendicular to the fuselage. Small misalignments can affect lift, stability, and handling.

---

Gong mast V3 Attaching the Front Wing

The front wing connects directly to the fuselage and works in tandem with the mast:

• Slide the Wing onto the Fuselage Mounting Point

• Secure with Provided Hardware: Tighten bolts incrementally to ensure even pressure

• Verify Alignment: The wing must sit flush with the fuselage and parallel to the mast

Correct front wing alignment enhances lift, reduces drag, and improves overall foiling performance.

---

Gong mast V3 Installing the Rear Stabilizer

The rear stabilizer ensures pitch control and overall stability:

• Position the Stabilizer: Slide it onto the rear fuselage mount

• Secure with Bolts: Tighten evenly to prevent flex

• Double-Check Level: Misaligned stabilizers affect handling and increase fatigue

Gong mast V3 Mounting the Mast to the Board

Once the fuselage, front wing, and stabilizer are assembled:

1. Align the Mast with Board Insert Points: Confirm that the 100 cm V3 mast sits flush in the board inserts

2. Secure with Gong-Approved Bolts: Gradually tighten in a crisscross pattern to distribute pressure evenly

3. Final Torque Check: Ensure all bolts are tightened according to manufacturer specifications

Proper installation guarantees stability, reduces unnecessary stress on carbon fibers, and ensures the mast performs as designed.

 Pre-Ride Checks

Before heading onto the water, always:

• Inspect all bolts and fittings for tightness

• Ensure mast alignment is perpendicular to the board

• Check the integrity of carbon components for cracks or damage

• Test foiling control on calm water before attempting high-speed maneuvers

Performing these checks improves safety, optimizes performance, and extends the lifespan of your Gong V3 mast.

Detailed Use Cases

The Gong Foil Carbon Mast HM 100 cm V3 is engineered to excel across a wide variety of foiling disciplines. Its combination of high-modulus carbon, hydrodynamic efficiency, and V3 precision engineering allows riders to confidently tackle different water conditions, skill levels, and riding styles. Here’s an in-depth look at how this mast enhances each foiling experience:

---

 Freeride Foiling

Freeride foiling focuses on fluid, effortless movement across the water, balancing speed, stability, and maneuverability. The Gong V3 mast enhances freeride sessions by:

• Delivering smooth lift that minimizes abrupt movements

• Offering reliable control in both calm and slightly choppy waters

• Reducing fatigue during extended rides thanks to its lightweight design

Riders immediately notice how responsive and stable the mast feels during carving turns. The 100 cm height ensures the board remains agile while providing enough clearance for confident foiling. Additionally, the V3’s refined carbon layup delivers consistent performance, allowing riders to focus on enjoyment and style rather than compensating for equipment limitations.

 Racing Foiling

For those seeking competitive performance, racing demands precision, speed, and efficient power transfer. The Gong Foil Carbon Mast HM 100 cm V3 supports racers with:

• High torsional stiffness for maximum energy transfer

• Reduced drag for improved top speeds and acceleration

• Precise handling for tight turns and tactical maneuvers

Every movement translates directly to the foil, giving athletes an edge in competitive environments. Moreover, the mast’s hydrodynamic design ensures minimal resistance, which is critical for maintaining momentum during high-speed sprints. Riders can push the limits while maintaining confidence in their equipment.

 Wing Foiling

Wing foiling combines wind power with hydrofoil performance, requiring both stability and maneuverability. The Gong V3 mast excels in this discipline by providing:

• Reliable lift to support varying wing power

• Smooth transitions during carving and pumping

• Predictable handling in gusty or uneven wind conditions

Wing foilers benefit from the mast’s responsive design, which allows them to make quick adjustments while maintaining balance. The combination of lightweight HM carbon and V3 precision engineering enhances the rider’s ability to perform dynamic movements and enjoy longer, more controlled sessions.

 Pump Foiling

Pump foiling emphasizes generating lift without relying on wind or waves, requiring energy efficiency and precise responsiveness. The Gong V3 mast supports pump foiling by:

• Reducing resistance to enhance energy transfer

• Providing predictable flex for effortless lift generation

• Maintaining stability during high-frequency pumping motions

Beginners appreciate the increased responsiveness that allows them to lift off faster, while advanced riders gain refined control during aggressive pumping sequences. The V3 carbon structure ensures that every movement feels intuitive, transforming effort into performance with minimal energy loss.

Beginner to Advanced Transition

One of the most compelling advantages of the Gong Foil Carbon Mast HM 100 cm V3 is its adaptability across skill levels. Beginners benefit from its stability and ease of lift, while advanced riders enjoy:

• Enhanced torsional stiffness for precise control

• Improved responsiveness for high-speed maneuvers

• Durable carbon construction for long-term reliability

This mast allows riders to progress confidently, making it an excellent long-term investment for growth in foiling skills. Its versatility ensures a seamless transition from learning to advanced riding techniques.

Maintenance and Care

Proper maintenance of the Gong Foil Carbon Mast HM 100 cm V3 is crucial to preserving its performance, structural integrity, and longevity. By following simple routines, riders can enjoy reliable performance across seasons while protecting their investment.

---

 Post-Ride Cleaning

Saltwater, sand, and debris can accumulate on your mast and other foil components. To maintain performance:

1. Rinse with Fresh Water: Immediately after each session, thoroughly rinse the mast, fuselage, front wing, and stabilizer.

2. Remove Residual Debris: Check for sand or dirt lodged in mounting points or bolt areas. Use a soft brush if needed.

3. Dry Completely: Wipe components with a soft cloth and allow them to air dry before storage. Moisture left on carbon fibers can lead to corrosion of hardware or surface damage over time.

Regular cleaning ensures smooth performance, prevents unnecessary wear, and maintains the aesthetic appeal of your V3 mast.

 Inspection for Damage

Routine inspections are essential to catch potential issues early:

• Check Carbon Surface: Look for cracks, delamination, or visible stress points

• Inspect Hardware: Ensure bolts are tight and show no signs of corrosion

• Examine Fuselage and Wing Connection Points: Misalignment or wear can affect lift and control

Addressing minor damage promptly prevents more significant issues, keeping rides safe and predictable.

 Storage Tips

Proper storage preserves the mast’s integrity and ensures it performs optimally over time:

• Store Indoors: Avoid prolonged exposure to direct sunlight or extreme temperatures

• Keep Dry: Moisture can compromise hardware and accelerate wear

• Use Protective Bags or Covers: Prevent scratches and accidental impact damage

• Avoid Pressure on Carbon Fibers: Do not place heavy objects on top of the mast

By following these storage practices, riders can extend the life of their Gong V3 mast and maintain peak performance.gong wing foil

---

gong wing foil Seasonal Maintenance

For longer-term care, perform seasonal checks:

1. Deep Clean: Remove all hardware and rinse thoroughly

2. Check for Carbon Integrity: Look for any subtle cracks or stress lines

3. Lubricate Metal Parts: Apply a light anti-corrosion spray on bolts and mounting points

4. Tighten Bolts: Re-check torque on all connections before the new season

Seasonal maintenance ensures that your mast remains as responsive and durable as the day it was purchased.

---

gong wing foil Tips for Longevity

• Avoid dropping or striking the mast against hard surfaces

• Always use Gong-approved hardware for assembly

• Limit prolonged exposure to UV light and harsh chemicals

• Perform pre-ride inspections, especially after transport or heavy use

Safety Recommendations

Foiling is an exhilarating sport, but it requires awareness, proper preparation, and safe practices. The Gong Foil Carbon Mast HM 100 cm V3 provides high performance, but riders must complement its capabilities with safe usage to minimize risk.

---

 Pre-Ride Safety Checks

Before each session, perform thorough inspections to ensure equipment integrity:

• Check Mast and Foil Connections: Confirm all bolts are tightened according to manufacturer specifications

• Inspect Carbon Mast: Look for cracks, delamination, or other structural damage

• Verify Board and Footstrap Setup: Ensure secure attachment to avoid slipping or accidents

• Test Rider Controls: Make sure the foil responds predictably to inputs

Performing pre-ride checks consistently reduces the risk of equipment failure and enhances rider confidence.

---

Gong mast V3 Personal Protective Gear

Riders should always wear appropriate safety equipment to minimize injury risk:

• Helmet: Protects against accidental impacts with the board, foil, or water

• Impact Vest or Buoyancy Aid: Provides flotation and reduces injury from falls

• Wetsuit or Protective Suit: Shields from cold water and minor abrasions

• Foot Protection: Neoprene booties prevent cuts from sharp foil edges

Even experienced foilers benefit from wearing protective gear. Safety always complements skill and equipment performance.Gong mast V3

---

Gong mast V3 Water and Weather Awareness

Understanding water conditions and weather is essential for safe foiling:

• Check Wind and Water Conditions: Avoid foiling in overly choppy, stormy, or high-wind situations beyond your skill level

• Identify Hazards: Be aware of submerged objects, rocks, and shallow areas

• Ride Within Skill Level: Adjust your session to match experience, avoiding overly aggressive maneuvers in challenging conditions

• Respect Local Rules: Observe no-go zones, marine traffic, and other water safety regulations

Awareness of environmental conditions helps prevent accidents and ensures enjoyable foiling sessions.Gong mast V3

---

Gong Foil Carbon Mast HM 100 cm V3 Safe Maneuvering Techniques

Using proper technique reduces the risk of falls, collisions, or injuries:

• Gradual Learning Curve: Beginners should start in calm, shallow water

• Controlled Turns and Pumping: Avoid sudden, aggressive movements until fully confident

• Maintain Clear Distance from Others: Allow sufficient space for turns, jumps, and stopping

• Proper Fall Technique: Fall away from the foil to minimize impact

Practicing safe techniques ensures longevity in the sport while preventing unnecessary accidents.

---

Gong Foil Carbon Mast HM 100 cm V3 Emergency Preparedness

Being prepared for unexpected situations improves overall safety:

• Carry a Whistle or Signaling Device: Useful for alerting others in emergencies

• Know Self-Rescue Techniques: Learn how to detach the foil safely if you get tangled

• Stay Within Reach of Shore or Boat: Especially for beginners or in remote locations

Preparedness complements equipment reliability, ensuring that fun remains safe.

Comparison with Previous Versions and Competitors

The Gong Foil Carbon Mast HM 100 cm V3 represents a significant evolution in mast design. By analyzing its advancements over previous Gong versions and comparing it to competitor models, riders can make informed choices based on performance, durability, and versatility.

---

 Improvements from Previous Versions

The V3 version incorporates multiple design refinements based on rider feedback and advanced engineering:

• Enhanced Torsional Stiffness: The refined carbon layup minimizes flex, translating rider input into precise foil movement

• Optimized Weight Distribution: Weight reduction without sacrificing strength improves lift, acceleration, and agility

• Reinforced Stress Points: Areas prone to stress or impact are reinforced, increasing durability

• Hydrodynamic Refinements: Smoother edges and curves reduce drag, enhancing glide efficiency

Compared to the V2 mast, riders notice a more intuitive ride, sharper maneuvering, and better lift control, especially in high-speed conditions or choppy water.

---

gong wing board V3 vs Competitor Carbon Masts

When placed alongside other high-modulus carbon foiling masts on the market, the Gong V3 demonstrates several advantages:

From this comparison, it’s evident that the Gong V3 mast offers a balance of lightweight construction, exceptional stiffness, and versatility that few competitors achieve simultaneously. Riders gain both performance and confidence in a variety of water and wind conditions.

---

 Rider-Centered Design Advantage

The V3 mast is not just about materials or numbers—it’s engineered around rider experience:

• Intuitive Control: Enhanced torsional stiffness makes handling more predictable

• Smooth Lift: Optimized carbon and hydrodynamic shaping deliver effortless glide

• Long-Term Reliability: Reinforced stress points reduce the risk of structural fatigue over time

• Versatility: Compatible with a wide range of foiling setups, boards, and wings

These design choices allow riders to focus on skill development, technique, and enjoyment rather than compensating for equipment limitations.

---

Summary of Competitive Edge

• Performance: Higher stiffness and lighter weight for better lift and responsiveness

• Durability: Reinforced V3 carbon layup extends lifespan compared to previous models

• Versatility: Fits multiple boards, wings, and skill levels, outperforming many competitor designs

• Innovation: Hydrodynamic refinement reduces drag and improves glide efficiency

The Gong Foil Carbon Mast HM 100 cm V3 clearly stands out as a forward-thinking choice for riders seeking reliability, precision, and high-performance foiling.

Program

The freeride slalom mast, with exceptional glide and perfect maneuverability.

Presentation

The 100 cm HM carbon mast is a true technological gem. With glide, rigidity, lightness, and precision, it is the perfect mast for race disciplines, delivering unmatched performance with exceptional maneuverability in tight turns.

The 100 cm length takes it out of wave and freestyle disciplines, concentrating on race and high-speed freeride. It provides an ideal height to ride confidently in choppy conditions, maximizing control and stability at high speed. This length lets you execute jibes and tacks at full speed, handling chop and challenging points of sail with ease.

The High Modulus Prepreg Carbon construction boosts the fiber content in the composite. With more carbon and less resin, it becomes incredibly rigid and responsive.

Along with the material work, their application is carefully designed and calculated. The flex and twist are fully controlled by optimizing the orientation of the carbon fiber layers. Additionally, the high-density core of the internal structure is strengthened with a 50-layer carbon double stringer.

As a result, we achieve powerful dynamics even with thinner thicknesses and more fluid profiles than structural ones.

With its 13.5 mm thickness, this mast offers exceptional…

See More

Shape

The 100 cm length is perfect for fast freeride and slalom. It strikes a balance between freeride and race, providing excellent versatility.

The mast geometry is designed to deliver maximum glide and stability on all water conditions. The lower half of the mast has a thickness of 13.5 mm with a consistent profile. This allows for superior glide with no flexibility or twist. The upper part is designed to reinforce the mast’s rigidity. Even with its large length and thin profile, this mast maintains exceptional stiffness, giving you full control.

The 1.5° rake integrated into the plate raises the nose of the board.  The higher front foot position offers comfort at high speeds and forgiveness during touchdowns. This design allows you to push harder with the front foot for increased acceleration.

A more efficient foil shape

One of the key elements in the evolution of this range is the complete redesign of our foils to increase their structural and hydrodynamic qualities.

The V3 fuselage is:

• faster
• more rigid
• more resistant
• lighter

 

The new round shape allows a 12% gain in glide and the thicker section approaching the stab increases the strength and rigidity of the foil.

Hours of calculations on extremely powerful computers have allowed us to optimize the smallest detail to maximize performance. The fillets of all our connections have been carefully studied and adjusted to minimize hydrodynamic disturbances and increase the rigidity and resistance of the assembly.

Carbon HM

The TORAY M40J High Modulus carbon used on our Team Series range offers incredible rigidity. It is a high-end carbon that delivers high mechanical properties while remaining resistant. A carbon used in aeronautics as well as for high-end sports equipment.

Its mechanical characteristics, such as its superior tensile strength and Young’s modulus, allow for exceptional performance on the water.

Your equipment is rigid, responsive, and extremely stable.

Retro fitting

The entire range, from the fuselage, to the mast, to the front wing and the stab, has been revised to radically boost the performance of our foils, without being limited by our old connection shapes.

However, this choice to change all of our parts could not be considered without continuing to offer compatibility with our old ranges.

We therefore offer a wide choice of fuselages which gives you the freedom to mix all our masts, front wings and stabs, whatever their generation.

Carbon HM Mast Technology

High Module Carbon offers unparalleled rigidity, representing the pinnacle of performance in our most advanced wings and masts, which face the most demanding structural constraints.

Made entirely of High-Modulus carbon, this construction is all about performance. Its exceptional fiber properties enable us to design daring and technically sophisticated shapes.

The products have no flex, the fibers are oriented along multiple axes to lock in bending and torsion, ensuring maximum responsiveness.

Thanks to pre-impregnated fibers, we can guarantee optimal resin usage, providing perfect cohesion at the lightest possible weight.Gong mast V3

Each layer of carbon is carefully hand-assembled around a high-density hydrophobic foam core, in a steel mold. A central stiffener is integrated to increase rigidity without compromising on lightness.

The mold is then subjected to high pressure and heated to 150°C to solidify the carbon. The foam core, seeking to expand under the heat, ensures even compression between the carbon layers, ensuring a strong and durable structure.Gong mast V3

Durability and repairability are at the heart of our development philosophy. Our foils are tested and proven by dozens of team riders, hundreds of employees, and thousands of customers worldwide. Even in case of damage, our products can be repaired multiple times, ensuring exceptional longevity.Gong mast V3

LEARN MORE ABOUT THE CARBON HM TECHNOLOGY